Mixing Information
Mixer Information
Mixer Selection Guide
Request Additional Information

4,500 Gallon Magnesium Hydroxide Slurry Storage Mixing System:

Model AQO3X Heavy Duty Gear Driven Fixed Flanged Plate Mounted Mixers - Pricing Matrix

All pricing in US dollars, FOB factory.

Motor Class F insulated, tropicalized, SF=1.15, chemical duty motor, 230/460 volt, 3 phase , 60 hertz. 

Pricing in Effect:

Full 4,000 gallon Poly Tank pdf drawingA typical Magnesium Hydroxide mixed storage tank is approximately 2,500 gallons, where multiple tanks are typically used to achieve a chemical usage/delivery cost  optimums.  

Attached is a typical 4,000 to 4,500 gallon poly storage tank that presents an alternative low cost magnesium hydroxide storage tank option for your consideration.  The basis of the design makes the following assumptions:

  1. Maximum Specific Gravity = 1.6-1.9
  2. Maximum Viscosity = 2,500 centipoise
  3. A standard 4,000 gallon poly storage tank, supplied by others.  
  4. An angular offset mounting arrangement is used (in-tank anti-swirl baffles are not required).  
  5. 316D/316 Stainless Steel mixer wetted parts.
  6. 230/460 Volt Power source.
  7. Mixer support bridge supplied by others.     

The advantages are significant:

  1. Save on floor space (five (5) 96" diameter 2,500 gallon tanks as compared to three (3) - 4,000 gallon tanks)
  2. Three (3) vs. Five (3): Both the number of tanks and mixers.
  3. Lower horsepower 3/4 vs. 3 or 5 horsepower.
  4. Class F insulated motor 
  5. Engineering Mixer Specification

Complete design for 4,500 gallon Magnesium Hydroxide Storage mixing application. Includes engineering specifications, complete mixer pricing, tank drawing, mixer mounting orientation for waste water treatment systems.


Mixer/Mixing Information
www.mixerinformation.org |  mixerinfo@verizon.net